Color Display
16-year's experience of portable display solution provider, meeting and exceeding Customers' expectation.
OEM
Customer's requirement --- Step 1
Requirement from customer required, technical review and project assessment to be discussed, and then drawing was drafted.
Point : Requirement identification
Solution Proposal --- Step 2
Do the internal assessment for Customers' requirements, including the capacity from subcontractor, submitting project assessment to Customers
Point : Assessment
Drawing draft and Mathematical Modeling --- Step 3
Explosion Diagram is designed and drafted, frequent discussion with Customer and come to agreement before modeling
Point : drawing and modeling
Sampling --- Step 4
After Drawing and modeling approved, samples would be made and all dismension shall be inspected , then assembly would be implemented, relative test shall be carried on for function check
Point : sample assembly
Customers' feedback on Sampling --- Step 5
Complete sample shall be provided to Customers togther with internal inspection report, Customer shall inspect all the points that fixed in the above " Customer Requirement", modification shall be made when needed
Point : Inspection and modification
Ram Up --- Step 6
Small volume shall be applied after sample is approved by Customers, in this pharase every production process shall be monitored and recorded, modification shall be made in case of needed
Point : Production process monitor
Large Volume Production --- Step 7
When Ram up is stable , mass production shall be prepared and implemented for large delivery to Customer, in this pharse standard qulity inspection process shall be implement before delivery
Point : Quality inspection and capacity guarantee